| What do you use as Prefilter before Bakki Shower?
I am using GcTec SS Vortex prefilters. In one of my pumps have reduced flow. All lines were checked for suction leaks and tightened, pumps switched no differance. My suction lift is about 1.5 to 2 ft, and the lift after pump is about 7 feet using the A75 artesian pump 1/2hp. I disconnected this vortex and have not reconnect setup (broke swing valve again). Now I am thinking how to either leave vortex out and pipe directly to pump or take out the backflush pipping and valves, maintain filtration only and open discharge valve on Vortex to waste during filtering mode. All this to increase flow (why the water in pump basket is always 1/3 to 1/2 full).
What do you Bakki Shower folks use for prefilters if any and what do you recommend I do to increase flow. I wanted to load pictures I had already posted on this forum but I do not know how, it just shows where I posted them, help please.
Bob |