|
We may have a little translation trouble with this stuff. Living on mainland Europe makes it hard for me to know just what is and is not availible to the markets in other countries let alone know what the product is called there. I have done a little digging and found some info and managed to translate it.
What I like about it is the fact that it will also adhere to PVC where as silicone can be peeled off when dry. It won't stick to polyurethane.
The product I use is called MS Polymer from Zettex and is described in the Dutch literature as a silane-modified polymer.The rest is a bit cut and dried info but may interest a few of you.
Non toxic
Injectability
5bar/3mm/23°C 140g/min
Skin Forming
23°C 50% R.H.8 minutes
Non-Stick
23°C 50% R.H. 25 minutes
Interal hardening
23°C 50% R.H.
24 hrs 3.9mm
48 hrs 5.1mm
72 hrs 5.9mm
96 hrs 6.7mm
Shrinkage after hardening
<3%
Hardness DIN 53505
58 shore A
Tensile strength
2.61 N/mm
Tear resistance
73 N/cm DIN 53507
Thermal stability
-30°C to 95°C
Peak
155°C max 30 minutes
Stretch to break
>350%
Application range
+5°C to +40°C
Salt water and chlorine proof
Vibration resistant
can be painted over directly using Acylic and High-Solid paints
(edited to make it a bit bit more legible)
|