|
My pipe going down in the well is only a 6 or 8 inch pipe and I am not sure if that has anything to do with it or not. The well does not go dry after 6 hrs run time, I still have water but this is using a hose pipe. I put a 1 and a half inch pipe in a I lost water after about 1 hour. I think it might be the switch like I said Im not sure. It was filling good for the first two weeks but after that the water level started droping, thats when I noticed that the switch was giving me a problem. Its raining today so I dont know if I can get out to see about the switch. You may be right about the foot not being deep enough in the water. I am going to call the man that put the well in to see how far it is in the water and see if I can have him lower it some and maybe that will help. What about the tank that sit on top of the well does that have anything to do with the amount of water that I am getting from the well? I have heard that I need a large tank setting on top, what this has to do with it I dont know. After the 40 min run time for the well to drop it only takes about 15 mins for it to recover, so that is what leads me to believe that I have a good supply of water. I just have to figure out how to get it out and how to set up the timer. I think the one hr. on an one off is going to do the trick.
|