|
Hi guys, I hesitate to jump into this thread but here goes. I have built my own Bakki Shower and I am 90% done with installing it. It's made out of stainless with 3 stacked tray etc so its the real deal. My plan is to use Matala at the bottom with lava on top of that for the first round of testing. I am going to document orp, tds and ph readings daily of my 2 ponds. One pond will have the bakki installed and the other will not. Current orp readings are 195 on the non bakki and 140(ouch) on the pond that will soon be running the bakki. If there is anything else you guys think I should test during this let me know. I have no plans to test ammonia or nitrites as both of these ponds test out at 0 for both always. I will be posting this data to my website starting in the next week or so when I finish the unit up. If this round goes well and shows marked improvement then I may switch media and do another round of tests as well to see if that can be improved upon. BTW this will be at the end of a fairly standard US setup settlement-pump-bead-uv then the bakki.
__________________ Koi-Unit |