| I do have a question
i'm using 2" flex pvc for most of my plumbing. The flex PVC from the TPR under the water fall is not round. I wanted to make all of my connection from the flex PVC run in the filter pit. That way their is minimum joints that is hard to get to. I think when the factory put the flex in to a roll the strap was too tight.
I live in PA freezing is a concern.
option 1: cut the flex 3' back where it is round with a coupling.
option 2: will a fernco be able to make a water tight connection? Can something be inserted inside the flex before the fernco
I should just make the connection and not worry about it since their is abunch of other joints inground
Andy |