Quote:
Originally Posted by HenryC
In my case I needed containers that would hold the water in since my bakki shower would not be located next to the pond but around the side of the house (gravity fed back to the pond via two 4" lines). I found some heavy duty interlocking shipping containers that were the size I was looking for. All I had to do is drill all the holes in the bottoms (except the last tray which will have the two 4" lines). I also drilled holes near the top of each container to allow air to flow. The five 48" long, 15" wide, 11" tall containers cost $200 including shipping. That saved me over $1000 over the stainless steel unit. At 4000 holes drilled, my labor worked out to 25 cents per hole.