Hi Everyone,
I need your help. I now know that I want a (L) 16 x (W) 5 x (D) 3' 6"-5' , depending on slope to an Aireated BD that wil be secured in place with cement. The sides will be vertical. I plan on using TPR's to help with circulation too.
1) Is there a proper amount of slope I need to the BD?(ie; 1" for every 5', that type of answer)
I will be using/making a DIY
Skippy Bio Filter. A
skimmer for surface filtering. Any suggestions on a great DIY surface skimmer? I want to include some kind of DIY Mechanical filter too.
2)Any suggestions for a DIY Mechanical filter based on your experiences?- The pond will be a Traditional Koi only pond.
- With approximately 2' to 2' 6" above ground and 1' 6" to 2' 6" below ground.
- I will be using a preliner as well as a 45 mil.EPDM made by Firestone
3)What dictates what filter can or should use gravity to be fed?
Since I will be making the filters I need your opinions!!!
I bet sombody is going to point out that I have probably forgotten something being a Newbie.
Once I have decided what filters I will use I will then begin to plan the plumbing.
What else do I need to have in my filtration system to have my Koi thrive?
Thanx Vince