I think I might be able to help you... I just wnet through the whole mess myself and was after a lot of trial and error I got it. First you have to have the phot in your computer. pc mac who cares as long as we get to view it. j-peg seems to be the preferred format. The nex thing you need is your own web page with the photo on it or a good free image hosting site. Yahoo worked for me after setting up log in and all. post your foto to the site and if you look around enough on the screen with your picture there should be a check box / radio button to enable public viewing. after that is all set up you need to have the mesage box open in the forum and the picture as it sits on the web in another. click on your pic to make sure the url of the pic is in the url box on top of screen. next click the url to highlight it. next hit ctrl c now go to bito message area and click in pic url or image url or url link on or the other. while clicked into the box and cursor flashing hit ctrl v this should insert the image url into the box. now you shall hit preview and see if it works... not done yet! close the window w/ yahoo running not just minimize but close. now see if you can refresh the preview and see your pic. or at the very least the link enabled and click to see if it loads the pic if not go back and look for the enable public viewing button. I spent quite a bit of time battling this just recently if you need more help just ask thie enclosed link is to a small 3600 gph waterfall I built for a customer last year. good luck
http://f1.pg.photos.yahoo.com/ph/mik...m=File0006.jpg