Home | About Us | Contact Us


Koi Forum - Koi-Bito Magazine straight from Japan
Results 1 to 3 of 3

Thread: Pump/filter???

  1. #1
    Fry
    Join Date
    Jan 2004
    Posts
    4

    Pump/filter???

    Hi,My front pond is 2000 gallons.I am looking to fit a Nexus 200 from a 4" bottom drain and a Yamitsu cartridge filter to the skimmer.I am ideally looking to site the filters approx 24' from the pond.Is this practical and if so what size/make pumps will i need to return the water 24' back to the pond from the Nexus and skimmer..Also would there be any problems with air to the bottom drain from this distance???Thanks.

  2. #2
    Nisai Mike Mazur's Avatar
    Join Date
    Dec 2003
    Location
    Cedar grove, NJ USA
    Posts
    141

    distance

    With that amount of distance i would not go any smaller than 2 inch pipe. if pond was any bigger I would run 3 inch. would also shoot for a pump that can do 125% to 150% of the pond volume per hour. You will loose a good bit of flow over that distance. @4 feet doesn't sound like much but let me see.... the return will be just as long and now you are looking at 50 feet of pipe. http://cgi.ebay.com/ws/eBayISAPI.dll...category=20507 hgihlight and go here is a good sequence pump efficient and 3600 gph flow. take a look and see other wise find a similar pump, gotta run dinner just arrived good luck
    " I'd rather a bottle in front of me than a frontal lobotomy "

  3. #3
    Fry
    Join Date
    Dec 2003
    Location
    Utah, USA
    Posts
    6
    Aloha Marc,
    I would certainly agree with Mike, that 2" would be the minimum size for the return pipe, and 3" would give less resistance. And since most pumps push water much more efficiently than they pull, the supply piping needs to be larger to give an acceptable flow. A 4" from the bottom drain or even two drains with 3" pipes should give you good flow rates. I've been using Wave pumps from W. Lim, and have found them to be very efficient.
    I hope this helps,
    Dennis

Similar Threads

  1. Filter & Pump for newbie
    By Ex-Cabin-Crew in forum Main Forum
    Replies: 6
    Last Post: 04-15-2012, 07:28 PM
  2. Need help with pump / diy filter
    By jlbspd in forum Main Forum
    Replies: 3
    Last Post: 10-31-2007, 08:19 AM
  3. Submersible pump in filter chamber?
    By Akai-San in forum Main Forum
    Replies: 5
    Last Post: 09-20-2006, 11:32 AM
  4. new pump and its causing filter overflow
    By julia22 in forum Main Forum
    Replies: 25
    Last Post: 09-15-2006, 06:43 PM
  5. clean your air pump filter
    By dick benbow in forum Main Forum
    Replies: 7
    Last Post: 06-20-2005, 11:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Articles - Sitemap - FAQs and Rules

KB Footer Graphic
Straight from Japan... For the serious hobbyist!
All content and images copyright of: Koi-bito.com