Home | About Us | Contact Us


Koi Forum - Koi-Bito Magazine straight from Japan
Page 13 of 13 FirstFirst ... 3111213
Results 121 to 122 of 122

Thread: Cetus and Clarity Install . . .

  1. #121
    Honmei KoiCop's Avatar
    Join Date
    May 2005
    Location
    Southern California
    Posts
    3,774
    Quote Originally Posted by noidea View Post
    Thank you. I must have missed the part on cleaning the foam in the instruction.

    I do have foam on the pond water surface and maybe my stocking is low as only 2 tosai koi and around 10 goldfish.

    The foam come out only after feeding the fish.
    Are you feeding the Clarity water from a skimmer pickup? 'Cause that's how you'll get the most docs.

    Have you adjusted your flow? Too much or too little flow and your Clarity will not perform at peak efficiency.

  2. #122
    Tosai
    Join Date
    Nov 2008
    Posts
    24
    Quote Originally Posted by KoiCop View Post
    Are you feeding the Clarity water from a skimmer pickup? 'Cause that's how you'll get the most docs.

    Have you adjusted your flow? Too much or too little flow and your Clarity will not perform at peak efficiency.
    The pump is located at the last chamber that feed the CL3.

    The shop assistant adjust the flow for me.

    Now I am adjusting the amount feed to the CL 3. The pump is sending water to 3 outlets and one of them is the CL3.

    I realise that if I open fully the valve of the other 2 outlet, the water level is too low and not much foam will be created.

Page 13 of 13 FirstFirst ... 3111213

Similar Threads

  1. cetus seive install?
    By nguyen4 in forum Main Forum
    Replies: 5
    Last Post: 01-26-2010, 11:47 AM
  2. Cetus sieve
    By UP ALL NIGHT!! in forum Main Forum
    Replies: 2
    Last Post: 07-14-2009, 07:04 AM
  3. venturi, where and how to install in pond
    By UP ALL NIGHT!! in forum Main Forum
    Replies: 11
    Last Post: 08-18-2007, 11:17 PM
  4. Retro no-niche skimmer install
    By KoiCop in forum Main Forum
    Replies: 8
    Last Post: 07-29-2005, 05:13 PM
  5. uv install with the beadfilter
    By simon in forum Main Forum
    Replies: 6
    Last Post: 05-29-2005, 08:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Articles - Sitemap - FAQs and Rules

KB Footer Graphic
Straight from Japan... For the serious hobbyist!
All content and images copyright of: Koi-bito.com