Home | About Us | Contact Us


Koi Forum - Koi-Bito Magazine straight from Japan
Results 1 to 6 of 6

Thread: Wall thickness on raised pond

  1. #1

    Wall thickness on raised pond

    Hi all,

    I'm about to begin buying materials to construct a raised pond. I have no idea what thickness the wood should be.

    The pond will measure approximately 11ft x 5ft. It will be partially submerged with depths of between 4ft and 3 ft. 2.5 ft will be above ground. I hope that makes sense. So, the question is, how thick does the above ground wood need to be?

  2. #2
    Honmei MCA's Avatar
    Join Date
    Dec 2003
    Location
    Atlanta
    Posts
    2,606
    Wood? Instead consider a poured concrete floor with block walls. Plan so that the walls go around 24" above grade to provide a nice seating area and keep out wind blown debris, mud, and any yard chemicals from getting in the pond. Also helps to keep 2 and 4 legged animals out of the pond. Suggested depth 6-8' with 2' above grade and the rest in ground.
    Koi keeping is not a belief system; it is applied science with a touch of artistry.

  3. #3
    Daihonmei MikeM's Avatar
    Join Date
    Dec 2003
    Location
    Orlando, Florida
    Posts
    11,290
    Where are you located? If in a warm climate, having only 1.5 to 0.5 feet below the ground surface might work. (But, water could get very warm in summer.) If in a locale with true winter, pond may not be useable for several months of the year.

  4. #4
    I'm in The UK and raised wooden pools are fairly common.

  5. #5
    Administrator Brian's Avatar
    Join Date
    Dec 2003
    Posts
    1,239
    Quote Originally Posted by Happyclapper View Post
    I'm in The UK and raised wooden pools are fairly common.
    If you are building a frame for the liner made out of wood, I'd recommend that you use 2" thick by 6" wide or what we refer to as 2x6 board in the US. Make sure that you connect these to 4x4 posts that are anchored with cement to keep them in place and don't exceed 2 feet above ground if you keep the water level 4-6 inches from the top.
    Brian Sousa
    Koi-Bito Forum

  6. #6
    Thank you Brian, very much appreciated!

Similar Threads

  1. Lam's 10,000 US Gallon Formal Raised Koi Pond
    By Lam Nguyen in forum Main Forum
    Replies: 45
    Last Post: 03-14-2013, 01:48 AM
  2. Replies: 23
    Last Post: 01-24-2013, 12:15 PM
  3. sealing a block wall pond
    By Meg in forum Pond Construction
    Replies: 22
    Last Post: 04-11-2011, 07:00 PM
  4. Replies: 7
    Last Post: 08-02-2008, 12:57 PM
  5. ideal cement wall thickness
    By Steve Nguyen in forum Pond Construction
    Replies: 13
    Last Post: 07-17-2006, 08:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Articles - Sitemap - FAQs and Rules

KB Footer Graphic
Straight from Japan... For the serious hobbyist!
All content and images copyright of: Koi-bito.com